Search found 4 matches

by twoody65
August 10th, 2019, 2:42 pm
Forum: General 3D Printing Conversation
Topic: Need help with Extruder heating then cooling.
Replies: 4
Views: 5047

Re: Need help with Extruder heating then cooling.

I just turned it on and this is what it is putting out. SENT: M105 READ: ok T:25.4 /200.0 B:35.0 /0.0 T0:25.4 /200.0 @:127 B@:0 READ: Error:Heating failed, system stopped! Heater_ID: 0 READ: Error:Heating failed, system stopped! Heater_ID: 0 READ: Error:Heating failed, system stopped! Heater_ID: 0 R...
by twoody65
August 10th, 2019, 12:59 am
Forum: General 3D Printing Conversation
Topic: Need help with Extruder heating then cooling.
Replies: 4
Views: 5047

Re: Need help with Extruder heating then cooling.

I have tried everything you suggested and it is still doing the same thing. I have noticed that once it happens it won't heat up anymore. It is almost like it blows the thermistor and heater which, is a head-scratcher.
by twoody65
August 4th, 2019, 5:36 pm
Forum: General 3D Printing Conversation
Topic: Need help with Extruder heating then cooling.
Replies: 4
Views: 5047

Need help with Extruder heating then cooling.

I have a Creality CR-10S and the extruder heats up and as soon as I start printing it starts cooling down. I have changed the system board to the new one where the Capacitor is the new one and I have also replaced the Thermistor and heater element. But it does the same thing. I don't understand what...
by twoody65
August 4th, 2019, 4:24 pm
Forum: General 3D Printing Conversation
Topic: Cr10 nozzle heating to set point then reverting to
Replies: 2
Views: 3831

Re: Cr10 nozzle heating to set point then reverting to

I have only one printer and mine does a similar thing. It heats up and as soon as I start printing it starts cooling down. I have changed the system board to the one that the Capacitor is the new one and also replaced the Thermistor and heater element. I don't understand what the issue is any help w...

Go to advanced search