3D Printing Forum

I've heard much good about both. I like the enclosed nature of the P1S and think it would be worth the extra money

The AI basic (minus the multiple material setup) looks neat.

I'd definitely post that to their forums

Maybe check the Cura profile (or Prusa Slicer) and copy those settings over?

At work I bought a FormLabs 3L and almost 2 years later, finally setting it up. Printing soon I hope

Hey everyone, how are you doing?

The right settings helps for sure!

200C is at best, your guess for a printing temp. First, I'd make sure the material is dry. PLA and so on can all attract moisture so drying before use is a great best practice. Also, I would do a temperature tower to find out what that material's ideal print temp is. EVERY machine is different and I...

Image isn't working

Remote monitoring is a good start, something like Octoprint with the Obico plugin Safety Enclosure to contain the print so you aren't spreading fumes throughout your home. Proper ventilation, either outside or filtration, using something like a BOFA device Fire safety, I use WhamBamSystems The Cloud...

Sounds like a defective MOSFET? Where did you get it? Amazon or?
I usually go direct to Tiny Machines for Creality parts

Well a few things, Creality is giving you specs for their bed. I suspect that stock bed is a 24v bed? You said you went with an AC 500W bed. What thermosistor is that using? There are different types out there, so it may be different that what the Ender 5 Pro's FW is set to You say resin, then ASA, ...

I'm not as savvy with resin as others, but I know there is a issue where suction can pull the part off or deform it

I'm impressed - you've really junked the stock crap from Anycubic and put some quality hardware in there. The Slice Engineering Mosquito Magnum is a great hotend. I don't know anything about Klipper - I just haven't gotten there yet, so I can't offer anything super constructive. Have you checked Red...

I've had to do this a lot with the three CR-10S machines I upgraded to SKR Mini E3 v3 and the TFT35 screens

I upload via vsCode, then after uploading the new firmware, I do an M502 and M500

It sounds like you are using some pre made firmware?