3D Printing Forum

In the early days of developing the titanium for these printers they had a small workshop in a field built like a shoebox so the roof would lift off in an explosion. Several printers and workshops were lost until it was perfected, but that's going back about 15 years now.

I too sometimes get a curl up when priming, it can also vary with a change in temperature. If I change material or colour I do an atomic pull always using a white filament and then I have a pull-through, ( I have a length of 1.75mm filament which is long enough to pass through the Bowden tube with 1...

The piece I modelled and printed for the Ferrari 456 has been mentioned in autocar magazine, although typically they don't get their facts right.

I only slowly increase the fans over the first 5 to 10 mm and due to the geometry of my design of fan ducts I can't remember the last time I needed to go above 50% as they really push it out. But for adhersion I usually use Hairspray although recently I've been trying PrintaFix which is working real...

Hi Roland the DJ300XL

Welcome to the forum

She was probably responding to what she may have though was a mouse!

Where did you get the bits from Roland?

I use Robet's one with, the long version to take 1kg spools, it is great, reducing friction to the feeder.
I use my dovetail system so I have a modified mount.
https://www.youmagine.com/designs/low-f ... poolholder
https://www.youmagine.com/designs/dovetail-mount

Happy birthday to you, happy birthday to you.
Happy birthday to you oo oo ooooo.
Happy birthday to youuuuuuuu!

Hi Stu, what flexible filament are you using? Also do you have a good 200um profile, and what slicer do you use?

I haven't yet, I think Anders has and I think he mentioned requiring higher temperatures to print for the PC

Good idea, a fresh brew of coffee

Where abouts is Frederick's S3D profile?

I need to adjust my I2K insulator, just open out the bore a bit as I get a small bulge on the end of the filament at the final retraction that won't re-enter on the next print.
I adjust my previous one and it solved the problem.