3D Printing Forum

I watched to a few you-tube videos on How to install phpBB though this only get you basic information, Would like to know more is there some more in-dept instructional documentations. When I was younger ( teenager ) we Hosted a Dial-up BBS for those who wanted to dial using phone modem and check out...

Both my 3D Printers run with a dual Z in parallel now for 3 years with no problems. Do not like the ideal of twice the current though, if I designed the circuit would had wired them in series. I have been thinking about my MPCNC it used X & E0 for X and Y & E1 for Y to drive stepper motors. ...

Your timing is OK, It has been getting crazier for everyone for finding time for all that has to be done.

This leaves us very little time for doing these things we want to do.

I have two working APC Smart-UPS 2200 uninterruptible power supply backup in case of a blackout. These are used units that came from a defunct fast food restaurant, an were given to me free of charge. After checking them out I found one had major electronic problems and it ended up in a circular fil...

Hello @SNG;

It has been quite a while, bring us up to date on how your 3D Printing is going these days.

Hello @lllloydo;

Did you ever get the information you needed to get the 2nd extruder working.

Would be easier to answer your question with pictures to give us an ideal what we need to see. Normally when you have a hole that is being filled in, is because the outer shape was created as a solid. Post images and give more details, this would greatly help us in solving the design with a hole bei...

I purchased some it was the Green rubbing alcohol,, and no 50% alcohol will not work.
The Centers for Disease Control and Prevention recommends hand sanitizers with at least 60% alcohol.

RodB wrote: ↑April 28th, 2020, 12:34 pm I have managed to do a cube with a whole in it so going to print now. I will let you know how it goes

How many sides did you give the hole.

First Create the 20mm cube, then create the 15mm cylinder 18mm in depth.
Using the Align tool Raise to the Height to the Top of Cube then center models.

While the two are still selected group models
Can also adjust shape characteristics
Search Google for tutorials

Returning to this Old Post. While I was helping RodB another 3D Printer User, was trying to upload his Fusion Model without luck. Web site told me to use a Fusion 360 desktop app. "What!" Did not have any desktop apps used online. Installed Fusion 360 desktop App now I can model Online or ...

Lez0 wrote: ↑April 27th, 2020, 12:49 pm Hi Robert
For me on parts that fit I make a 0.2mm gap. I find the print is 0.2mm bigger so I get a good fit.
It saves all the sanding afterwards.
So if I have a hole that an 8mm steel pin has to go in I make the hole 8.2mm.

Good information for @RodB

After removing the lip on the side that had cracked the worst.
I found the the top lid snaps in nicely on holds very well.
Though adjustments will need to be made as the lip of the back wall is bowed outwards.

Hello Again; I decided to Print your case. IMG_2408.JPG IMG_2407.JPG I did get it to close. With great force and as you can see in the photos cracked the top rim on both sides. Do not worry about the lines they happen when I try to use very little infill, without first printing a 3 layer outer wall,...

Need Help Post,

Try to Explain what you want we will try to help>