3D Printing Forum

Wow Country_Bubba that look petty assume

I would revert back to the original workplane and "sink" the standoffs into it?

Just as PrusaSlicer is a fork of Slic3r, SuperSlicer an Bambu is a fork of the Prusa software, So SuperSlicer is indirectly another form of the original Slic3r These three forks of Slic3r are different an went their own directions now can boast as independent slicers. Anyone who have user Slic3r, pr...

LePaul Thanks

Read this and even though knew the answer it never entered my mind.
I really need to start playing with my 3D Printers before forgetting every thing I learned...

What is your preferred Slicer: Superslicer or Prusaslicer

I currently am using Prusaslicer, though am not sure which has better features.

Should probably incorporate Superslicer in too my slicers, do some extensive testing to determine the best slicer.

I really need to learn how to use FreeCad, time is just too short my learning curve eats most of this time up.
in my opinion the best way is to learn isby watching using U-Tube Videos

Voxelab Aqulia printer adding a Bl - Touch


I had a long post typed then I backed up an lost it all so posted this really short help. Forum does not have an auto save feature.

I know a lot about 3D Printing though the question you asked does not make much sense to me.

Does anyone else have a solution for t4gp3

I think that your mask thickness should be thick enough to actually print. If you have a nozzle size of .4mm then the smallest thickness you can expect to print would be .24mm correct. The larger extrusion width produces more stable, faster printed models. The smaller extrusion width produces slow p...

That is so correct every thing seems to be a double edge sword. My 3D Printers had so many problems, direct form the factory. Undersize wiring causing most of the problems. Cheap proximity sensors making leveling next to impossible. Cheap all thread lead-screws which made artifacts on all models, th...

I downloaded your stl file could not get any of my slicers to see a model thick enough to slice correctly.

You may need to adjust your stepper motor Vref, this is the stepper motor current adjustments . The stepper motor current adjustment or V-Ref setting, is something that most 3D Printer users have had to learn. What you need to know before making this adjustment is DO NOT USE a metal adjustment tool....

When you adjust the Z-Step, there is a Store or Save settings option this will give illusion permanent memory. If you ever hit the load settings or initialize factory defaults the settings will again need to be set and saved. I kept a log book of my changed parameters of settings just in case of an ...

I had this problem on my Hictop 3D Printer determined that the Lead screws having a 8mm drop per turn was most of my problem. An until I changed I needed to turn on 3D Printer level bed and then 3D Print most days. Until I changed my lead screws with a TR8-2mm pitch single start lead screw. As any ...

I am confused, Not sure what you are asking me though have posted the STL file several time on this forum.