3D Printing Forum

I have used many miscellaneous bed surfaces on occasions when 3D Printing with some 6 year old filaments. My bed surfaces have been Vinyl transfer paper and plastic tape, various self adhesive bed surfaces. Never had a filament that I could not get a good 3D printed model. Note : My Filament is alwa...

You are welcome!!! I have my updated Ender 3 Cura profiles that are being used for my Hictop 3DP11/12 Prusa i3 Compatible 3D Printers. AN I have my Hictop 3DP11/12 Prusa i3 Compatible Printer using the Prusaslicer modified Ender 3 profile. My profiles setup for 270mm X 220mm hot bed. Soon to be setu...

I have used many Slicers all of which allowed me to 3D Print excellent 3D Models. I have 3D Printed my best using Prusaslicer including a few multi-colored models. Prusaslicer has many options that in my opinion make my 1st choice, there is no other reason I suggested using it. We talk an post about...

Most of your problems can be solved by simply installing the newest version of Prusaslicer. Then using the menu install the Proper configuration profiles. Click on Configuration select Configuration Wizard Select Other Vendors check box Creality Select Creality FFF Select Your Ender 3 Printer and up...

Had a similar problem found had selected 3mm filament setting while using 1.75mm filament.

Below is my skeleton fish photo printed with wrong filament diameter setting.

Downloaded your profile will create a profile an post.

Post your slicer profile and the Model STL File, I will do my part helping to create a working Prusaslicer profile for you.

Sorry to hear this. I found that PrusaSlicer works so well that in my opinion it was well worth this simple conversion effort.

Still use Cura on many projects though in some special cases prefer using PrusaSlicer.
I came into this 3D Printing as a hobby to learn all I could.

I have multiple configurations for ABS and PLA Filament. And even though all three of my 3D Printers are the same for my Hictop Profiles You can see I have a few one for Each of my Octoprint modules. And a couple for Each of My model Hictops 3DP11 and a 3DP12. Actually guess have a lot more individu...

This has to be difficult as TPU as I have heard is famous to stringing. Would you be in for a slicer change that I have thought was one of the best free slicer ever. If so Try Prusa slicer It has a web link to several 3D Printer configurations an a custom configuration. I start with a Ender 3 Config...

The dimple is a great Ideal

I am using a simple cheap bed surface purchased form China.

I have enabled S-Curves which calm down down the 3D Printer a bit.

I noticed that my heat block was askew. I went to investigate by touching it and it was LOOSE!! That could very well be the reason why all of my prints with the 4 bearing setup failed miserably. I'd like to see a diagram to see what the clearance should be from the threaded metal tube to the feed a...

I will update you on any changes I make for the BL touch and post them here. I'll likely work with your information to get it working. I must say again - your information spread throughout this forum is superb. Sometimes one has to read a bit before that information is revealed, but it's a decent a...

Yes I have all my Hictop custom versions of Marlin archived an can flash at will to any version wanting to test. I have flashed my 3D Printers to test problems others were having with a version to see if I could duplicate there problems & Correct. No I do not have a BL tough. I have a 3D Touch s...

I have flashed most versions of Marlin 1.x.x thru Marlin 2.0.9.2 had a minor problems using Marlin 2.0.9.3 so reverted to 2.0.9.2 on my Hictops.