Page 1 of 1

New Gutter Bracket

Posted: October 11th, 2018, 7:27 am
by Roberts_Clif
Today printing a Gutter Bracket designed using ThinkerCad, the Gutter was originally made with vinyl using ABS Brackets to support the Vinyl Gutter.

The gutter dimensions are 2.75 x 4.5 inches this is for a gutter that has hard to find parts.

Gutter Bracket.jpg

I believe that ABS is the best material for this part, as I have not yet purchased any PETG.

Will post the results when printing has completed.

Re: New Gutter Bracket

Posted: October 11th, 2018, 8:52 am
by Roberts_Clif
Let's take a test print to see if the Bracket fits my sample Gutter piece.

Img_2093-1.jpg
Img_2092-1.jpg

Looks good. Now lets print the whole Gutter Bracket in Brown.

Re: New Gutter Bracket

Posted: October 12th, 2018, 8:13 pm
by Roberts_Clif
Printed Gutter Bracket looks good.
Gutter Bracket -1.jpg