Profiles?

Discussion of Ultimaker's open-source Cura software
Post Reply
User avatar
LePaul
Reactions:
Posts: 3966
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Profiles?

Post by LePaul »

I've never used this...would this be the ideal way to save settings for different filaments?

I haven't tried it but was wondering if that's what this is designed for....and how well does it work?
nallath
Reactions:
Posts: 267
Joined: February 16th, 2016, 3:12 am
3D Printer(s): Ultimaker

Re: Profiles?

Post by nallath »

In 2.2 the profile stuff will be reworked.

In it's current state the profiles are a bit weird. Especially for materials.
User avatar
drayson
Reactions:
Posts: 254
Joined: February 15th, 2016, 5:04 am
Location: Graz, Austria
3D Printer(s): UMO with mods :-)

Re: Profiles?

Post by drayson »

I made an excel sheet which generates the material profile files out of the data you put into the table e.g. temperature of head and bed, some settings related to the use of special filament etc.
Should be attached so feel free to use it...
Attachments
_Material Data.xlsm
generate material cfg files out of an excel spreadsheet
(26.83 KiB) Downloaded 356 times
Post Reply

Return to “Cura”