Prusa I3 Fine Calibration - exellent information

Discussion of General / RepRap style printers! FDM/FFF printers that aren't gigantic!
Post Reply
User avatar
Chip Luck
Reactions:
Posts: 191
Joined: February 11th, 2016, 9:12 am
Location: Central Florida
3D Printer(s): HICTOP Reprap Prusa I3
Contact:

Prusa I3 Fine Calibration - exellent information

Post by Chip Luck »

Gang,

In case you missed it, here is a link to a multi-page and a fairly large read of how to build, setup, software explained, print, calibrate, set slicer's, etc. document. Although the layout and format is a little outdated, the data in there is one of the best and comprehensive I have come across. IMHO it is a must read for those just starting out, or if you just want to know more about a Prusa type printer. Check it out:

http://www.trustfm.net/hardware/3DPrint ... alibration

Chip
---
Post Reply

Return to “General / RepRap Printers”