RESTORE LEVELING AFTER G28

Software and Firmware Discussion - related to source code, firmware updates, etc.
Post Reply
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

RESTORE LEVELING AFTER G28

Post by Roberts_Clif »

I was reading the Github article

https://github.com/MarlinFirmware/Marlin/issues/10230

Roxy-3D points out the there is a and gives links to the firmware, i can not seem to find this firmware.

#define RESTORE_LEVELING_AFTER_G28

Can any one help with a download location for Marlin 1.1.9 with the #define RESTORE_LEVELING_AFTER_G28 included.

Or

How do I combine all the bug fixes to get to this point.
User avatar
GrueMaster
Reactions:
Posts: 522
Joined: March 15th, 2017, 8:46 pm
Location: Oregon
3D Printer(s): Hictop 3DP-17, Hictop CR-10S

Re: RESTORE LEVELING AFTER G28

Post by GrueMaster »

It is in branch 1.1.x, tag 1.1.9. Clone the git repo, then run 'git checkout 1.1.9' to get to that revision state.
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: RESTORE LEVELING AFTER G28

Post by Roberts_Clif »

Now this was crazy.
Did a search could Not Find "RESTORE_LEVELING_AFTER_G28 "
And I was looking straight at it.
Error-Space.jpg
Then I noticed the extra Space in the title, It is crazy because I did the double click to select and then pasted into the search.
Post Reply

Return to “Software and Firmware Discussion”