New 3D Printer build

Have a problem or question, suggested links/information/FAQ's? Post it here
Post Reply
KevinA
Reactions:
Posts: 4
Joined: August 2nd, 2016, 6:17 pm
3D Printer(s): MKS GEN 1.4 / HICTOP

New 3D Printer build

Post by KevinA »

Just finished building a HICTOP 3DP11 and decided it needed a wiring harness instead of the one length fits all vendor decision. I can find all the pins and bodies for the Dupont servo style connectors but the XH2.54 JST style connectors are a problem. Does anyone have the part number for the pins of the XH2.54 or JST style connectors?

Thanks
User avatar
LePaul
Reactions:
Posts: 3966
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Re: New 3D Printer build

Post by LePaul »

Moved this to the HICTOP RepRap Prusa I3 area for you :)
User avatar
Chip Luck
Reactions:
Posts: 191
Joined: February 11th, 2016, 9:12 am
Location: Central Florida
3D Printer(s): HICTOP Reprap Prusa I3
Contact:

Re: New 3D Printer build

Post by Chip Luck »

KevinA wrote:Just finished building a HICTOP 3DP11 and decided it needed a wiring harness instead of the one length fits all vendor decision. I can find all the pins and bodies for the Dupont servo style connectors but the XH2.54 JST style connectors are a problem. Does anyone have the part number for the pins of the XH2.54 or JST style connectors?

Thanks
Not off hand, you might want to search on the internet or post to the official RepRap forums over there, they have a large crowd...
http://forums.reprap.org/list.php?406
KevinA
Reactions:
Posts: 4
Joined: August 2nd, 2016, 6:17 pm
3D Printer(s): MKS GEN 1.4 / HICTOP

Re: New 3D Printer build

Post by KevinA »

The XH terminals are called XH2.54mm Female Pin Connector Terminal but after you find them they add they are for DUPONT connectors, they aren't, see images.
XH connector part numbers chart to search images and a Dupont Kit I found...

I have a Molex tool (63819-0000 ) that I modified to use to crimp the these connectors.
Attachments
Everything but a crimp tool and wire
Everything but a crimp tool and wire
These are the Dupont terminals
These are the Dupont terminals
These are JST XH 2.54 Terminals that are sometimes called Dupont terminals from China
These are JST XH 2.54 Terminals that are sometimes called Dupont terminals from China
This is a part number chart for the Socket
This is a part number chart for the Socket
Post Reply

Return to “General Questions”