Heating failed, Printer halted, Please reset.

Discussion of the Folger Tech Large Scale 3D Printer Kits, such as the FT-5, FT-i3 Mega, FT-6 and others
Post Reply
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Heating failed, Printer halted, Please reset.

Post by Lez0 »

I get this error when I am trying to heat the bed to 100°C, it happens after about 80°C.
Sometimes I don't get it for a few days, then, like yesterday it happened 5 or 6 times while heating the bed.
I have reset, switched it off and back on again, but it happens again, then it will work OK no problems.
When it is finally up to temperature it works fine.
Anybody got any ideas?

Thanks

Les
User avatar
LePaul
Reactions:
Posts: 3966
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Re: Heating failed, Printer halted, Please reset.

Post by LePaul »

Do you have a sheet of cork under your heated bed? Are you using a MOSFET?
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: Heating failed, Printer halted, Please reset.

Post by Lez0 »

It is a stock printer.
I have reduced the temperature of the bed to 80 degs for ABS and have had no problem.
For ABS I am using this seems to work OK for me.
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: Heating failed, Printer halted, Please reset.

Post by Lez0 »

Hi Paul
This Mosfet thing, is it easy to install, it doesn't look complicated.
Also which one did you use?
User avatar
LePaul
Reactions:
Posts: 3966
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Re: Heating failed, Printer halted, Please reset.

Post by LePaul »

I bought this one
Capture.PNG
Capture.PNG (63.61 KiB) Viewed 17668 times
Shane's video is pretty easy to follow on how to install. Mine's worked great

Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: Heating failed, Printer halted, Please reset.

Post by Lez0 »

Thanks Paul, this looks so easy I should be able to do it.
Post Reply

Return to “Folger Tech Large Scale 3D Printers”