My DICE build
Posted: December 30th, 2017, 10:13 am
This will probably be a slow one, i got about half of the parts last summer and only started putting some together the other day, but i am building René Jurack's small overengineered printer DICE (https://well-engineered.net/index.php/e ... diceupdate)
Most my frame parts is actually water jet cut instead of laser cut since i was ordering some water jet cut parts anyways this summer, so i added the DICE parts in.
It will have the new DICE-V2 hotend, the water cooled print head, water cooled trinamic drivers and a Bondtech BMG feeder, Cohesion3D-Mini control board, and "all extras" including René's 0.2mm airbrush nozzles and a display.
Today i started by assembling the cold end of the print head, and bending + attaching the fan shrouds
Most my frame parts is actually water jet cut instead of laser cut since i was ordering some water jet cut parts anyways this summer, so i added the DICE parts in.
It will have the new DICE-V2 hotend, the water cooled print head, water cooled trinamic drivers and a Bondtech BMG feeder, Cohesion3D-Mini control board, and "all extras" including René's 0.2mm airbrush nozzles and a display.
Today i started by assembling the cold end of the print head, and bending + attaching the fan shrouds