Page 1 of 1
fail print
Posted: November 19th, 2020, 9:54 am
by gmaldo
Hi
I´m having prints with missing areas, any idea what may be wrong?
Re: fail print
Posted: November 19th, 2020, 9:58 am
by Roberts_Clif
The slicer setting must not be compatible with the wall thickness in areas missing material..
Re: fail print
Posted: November 19th, 2020, 11:10 am
by Lez0
Hi gmaldo
Could you give us more info.
A screen shot of the part in the slicer software with the missing area shown would be a good start.
Re: fail print
Posted: November 19th, 2020, 2:40 pm
by gmaldo
slicer file seems to be ok, i can see complete part in layer by layer view, the missing area cames in diferent models and diferent zones even with the same model
Re: fail print
Posted: November 20th, 2020, 9:58 am
by Lez0
I am wandering if the LCD screen is faulty, can you check it.
It could also be a support problem, do you think you have enough.
I've had prints fail even though it printed OK before.
Re: fail print
Posted: November 21st, 2020, 10:34 am
by gmaldo
well it seems the LCD is the problem, it shows some dark spots . Ill change it and see if that fix the problem, thank you all guys for your help
Re: fail print
Posted: November 22nd, 2020, 2:45 am
by Lez0
Good luck with the LCD.
Please let us know how you get on changing it.