Y axis problems

Discussion of General / RepRap style printers! FDM/FFF printers that aren't gigantic!
Post Reply
Mr robot
Reactions:
Posts: 1
Joined: May 31st, 2020, 1:35 pm
3D Printer(s): Tevo Tarantula Pro

Y axis problems

Post by Mr robot »

My y axis is homing in the wrong direction and it will keep going in the wrong direction because there is no endstop also the belt is a little short should i get a new y axis belt if that will help anything
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: Y axis problems

Post by Roberts_Clif »

Post Reply

Return to “General / RepRap Printers”