Currently Printing Fail Proof Fidget Cubes and Flexi Turtle Ear Saver on both systems for Halloween Trick or Treats.
The Hinges stick on my 12v machine while they work perfectly on my 24v machine.
I can switch the filament between the two machines still the 12V printer does not like the Hinges
This is not saying that because it is 12 or 24 volts is works or fails this is just my way of keeping the two printers separate.
I could say Blu (" 24V" ) or Red (" 12V ")
Here are My Twins
I am beginning to wander if changing to Marlin 2.0.6 caused the problem of over extrusion.
Just started a print set of Turtle ear savers at 95% flow rate.
Starting my prints I found another problem.
I had the printer that has been printing Perfect models get a clog.
Have not changed filaments and this is my thought>>>>>
Believe that when they splice filaments together to make a roll sometimes they mistakenly use an ABS filament to splice PLA filament.
Or
Even if they use the correct filament it somehow is still not just right still causing the clog.
Have no proof of this it is just what I believe happens from time to time...
Turtle finished on Red at 95 % flow perfectly now I know that changing from Marlin 1.1.9BF to Marlin 2.0.6 may have exacerbate over extrusion.
Ended up Reducing the Flow rate on Both 3D Printers.
Over Extrusion
Printer firmware discussion
- Roberts_Clif
- Reactions:
- Posts: 1386
- Joined: March 25th, 2017, 8:17 am
- Location: Washington, State USA
- 3D Printer(s): Hictop 3DP11/12
Jump to
- Announcements
- ↳ News and Announcements
- ↳ Feedback, suggestions and more
- 3D Printers
- ↳ General / RepRap Printers
- ↳ HICTOP RepRap Prusa I3
- ↳ Software and Firmware Discussion
- ↳ Hardware Modifications
- ↳ General Questions
- ↳ Original Prusa i3 MK Series printer
- ↳ Wanhao Desktop 3D Printers
- ↳ Other make/model 3D Printers!
- ↳ Large Scale 3D Printers
- ↳ Creality Large Scale 3D Printers
- ↳ Folger Tech Large Scale 3D Printers
- ↳ Tevo brand 3D Printers
- ↳ General Large Scale Printer Area
- ↳ Resin 3D Printers
- ↳ Micro 3D Printers
- Ultimaker Printers
- ↳ Ultimaker Printers Discussion
- ↳ Ultimaker S5
- ↳ Ultimaker 3 / Ultimaker 3 Extended
- ↳ Ultimaker 2 / Ultimaker 2+ / Extended & Go
- ↳ Ultimaker Original & Ultimaker Original +
- ↳ General Discussion
- Filaments, nozzles and support material
- ↳ Filament and printing material
- ↳ Special brand filaments
- ↳ PLA Filament General Discussion
- ↳ ABS Filament General Discussion
- ↳ Speciality and Experimental Filaments
- ↳ Using different nozzle sizes
- ↳ General Filament & Nozzle chat
- Getting better prints!
- ↳ Help me fix this print!
- ↳ Show off your latest print
- Software & Electronics
- ↳ Slicers and CAD Software
- ↳ Cura
- ↳ Simplify 3D
- ↳ Other Slicing programs
- ↳ CAD and 3D Modeling Software
- ↳ Slic3r
- ↳ Electronics
- ↳ General Electronics Discussion
- ↳ Firmware
- ↳ Firmware
- ↳ Wireless Printing and Controllers
- General
- ↳ General 3D Printing Conversation
- ↳ Off Topics!
- ↳ The MarketPlace
- Modders Kiosk
- ↳ General Discussion