fail print

Form 2, Form 3 , Elegoo Mars, ANYBUBIC Photon and much more....with the prices coming down, many 3D printers employing this technology are available to the masses!
Post Reply
gmaldo
Reactions:
Posts: 3
Joined: November 19th, 2020, 9:48 am
3D Printer(s): crealty ld002r

fail print

Post by gmaldo »

Hi
I´m having prints with missing areas, any idea what may be wrong?
Attachments
failPrint.jpeg
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: fail print

Post by Roberts_Clif »

The slicer setting must not be compatible with the wall thickness in areas missing material..
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: fail print

Post by Lez0 »

Hi gmaldo
Could you give us more info.
A screen shot of the part in the slicer software with the missing area shown would be a good start.
gmaldo
Reactions:
Posts: 3
Joined: November 19th, 2020, 9:48 am
3D Printer(s): crealty ld002r

Re: fail print

Post by gmaldo »

slicer file seems to be ok, i can see complete part in layer by layer view, the missing area cames in diferent models and diferent zones even with the same model
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: fail print

Post by Lez0 »

I am wandering if the LCD screen is faulty, can you check it.
It could also be a support problem, do you think you have enough.
I've had prints fail even though it printed OK before.
gmaldo
Reactions:
Posts: 3
Joined: November 19th, 2020, 9:48 am
3D Printer(s): crealty ld002r

Re: fail print

Post by gmaldo »

well it seems the LCD is the problem, it shows some dark spots . Ill change it and see if that fix the problem, thank you all guys for your help
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: fail print

Post by Lez0 »

Good luck with the LCD.
Please let us know how you get on changing it.
Post Reply

Return to “Resin 3D Printers”