Hello,
I am new to this 3d printing world. I have a few questions, but I will start with an easy one... What model printer do I have.
The printer appears to be either a Hictop 3dp08 or Hictop 3dp18. On the https://www.hic3dprinter.com/ website, the picture is labeled differently between the manuals and the firmware pages.
After I figure that out, I have a few more questions.
Any help is appreciated!
What printer is this?!?
- Roberts_Clif
- Reactions:
- Posts: 1385
- Joined: March 25th, 2017, 8:17 am
- Location: Washington, State USA
- 3D Printer(s): Hictop 3DP11/12
Re: What printer is this?!?
It appears to be a Hictop 3DP08 located on this page
https://www.hic3dprinter.com/pages/firmware
https://www.hic3dprinter.com/pages/firmware
Re: What printer is this?!?
I see that. However, if you go to: https://www.hic3dprinter.com/pages/user-manual it appears to be 3DP-18. That is why I am confused.
- Roberts_Clif
- Reactions:
- Posts: 1385
- Joined: March 25th, 2017, 8:17 am
- Location: Washington, State USA
- 3D Printer(s): Hictop 3DP11/12
Re: What printer is this?!?
Do you have this Stock filament monitor!
If not then you have a 3DP08
https://drive.google.com/drive/folders/ ... zVFNndUWWs
If not then you have a 3DP08
https://drive.google.com/drive/folders/ ... zVFNndUWWs
Re: What printer is this?!?
Thanks for your help! I have the 3DP18. I have the stock filament monitor.
- Roberts_Clif
- Reactions:
- Posts: 1385
- Joined: March 25th, 2017, 8:17 am
- Location: Washington, State USA
- 3D Printer(s): Hictop 3DP11/12
Re: What printer is this?!?
Now what are your questions?