Marlin 2.0.6
Posted: August 22nd, 2020, 8:49 pm
Today I configured Marlin 2.0.6 for my Hictop 3DP11 and 3DP12 3D Printers.
Original
#define FIL_RUNOUT_INVERTING True
Compling set the state of changed variable to HIGH.
#define FIL_RUNOUT_STATE HIGH
Original
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
I hope nothing needs to be done here!
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
#define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing
Wow! on reboot Screen showed to Initialize EEProm This Compiled Marlin not presently in a working Hictop Printer it has been uploaded to a Dead stepper driver Hictop Controller.
Original
#define FIL_RUNOUT_INVERTING True
Compling set the state of changed variable to HIGH.
#define FIL_RUNOUT_STATE HIGH
Original
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
I hope nothing needs to be done here!
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
#define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing
Wow! on reboot Screen showed to Initialize EEProm This Compiled Marlin not presently in a working Hictop Printer it has been uploaded to a Dead stepper driver Hictop Controller.