What are you printing lately?
Posted: March 22nd, 2021, 12:17 am
Let's get a conversation rolling.... what have you printed lately...or working on?
Me... upgrades!
Me... upgrades!
3D Printing Forum
A place for people to learn 3D Printing!
http://www.3dprintingforum.us/
What are you printing lately?
Page 1 of 1
Re: What are you printing lately?
Posted: March 22nd, 2021, 8:55 am
my most recent projects have been cases to house pi zero w's and pi cameras. Have three of them now.
Re: What are you printing lately?
Posted: March 22nd, 2021, 12:36 pm
I've printed a few Pi3b cases that have a cover that supports a cooling fan...and can bolt onto 2020 rails
Re: What are you printing lately?
Posted: March 22nd, 2021, 12:49 pm
cam clip 3.0
I found this great little bag clip and have been printing several for every member of the family.
I found this great little bag clip and have been printing several for every member of the family.
Re: What are you printing lately?
Posted: March 23rd, 2021, 12:33 pm
I've been printing various things for work.
I have a very interesting project that I 3D printed as a sort of prototype to see how it all fitted together.
When I get permission I'll post some photos of it.
Lez
I have a very interesting project that I 3D printed as a sort of prototype to see how it all fitted together.
When I get permission I'll post some photos of it.
Lez
Re: What are you printing lately?
Posted: March 24th, 2021, 11:49 pm
Did this 
Re: What are you printing lately?
Posted: April 1st, 2021, 10:13 am
The other end of the scale, size wise.
These small gears are for a project I am working on.
Lez
These small gears are for a project I am working on.
Re: What are you printing lately?
Posted: May 9th, 2024, 4:10 pm
Raspberry Pi 5 / Pimoroni base cases.
Ryobi BT3x00 sliding miter fence ends
Ethernet cable organizers
Eero pro 6 wall mounts.
Tie Fighter Echo Dot V3 desktop stands
In design phase of camper van wall mount electrical control panel. I.E. wall mounted box that will house 12V power sockets, USB charging ports, water pump control switch, gray and fresh water level sensors / switch, Thermostat and controls for AC and heat. Control / data panel for inverter.
In design phase of... Updated bottom half of Raspberry Pi 5 / Pimoroni base cases, Simply adding mounting tabs to permit me to wall mount the Pi in the camper van. Simply taking the STL file and adding an ear with a hole through it for the screws on each corner, Probably bevel the hole for flat screws.
Because of the high UV exposure / automotive nature of the 2 in progress designs, I am trying to learn to print with PETG, and that stuff is a bit, fussier than PLA... I'll get there, I hope.
Ryobi BT3x00 sliding miter fence ends
Ethernet cable organizers
Eero pro 6 wall mounts.
Tie Fighter Echo Dot V3 desktop stands
In design phase of camper van wall mount electrical control panel. I.E. wall mounted box that will house 12V power sockets, USB charging ports, water pump control switch, gray and fresh water level sensors / switch, Thermostat and controls for AC and heat. Control / data panel for inverter.
In design phase of... Updated bottom half of Raspberry Pi 5 / Pimoroni base cases, Simply adding mounting tabs to permit me to wall mount the Pi in the camper van. Simply taking the STL file and adding an ear with a hole through it for the screws on each corner, Probably bevel the hole for flat screws.
Because of the high UV exposure / automotive nature of the 2 in progress designs, I am trying to learn to print with PETG, and that stuff is a bit, fussier than PLA... I'll get there, I hope.