Resin vat gets a filmy layer

Form 2, Form 3 , Elegoo Mars, ANYBUBIC Photon and much more....with the prices coming down, many 3D printers employing this technology are available to the masses!
Post Reply
punchitindaface
Reactions:
Posts: 1
Joined: April 24th, 2021, 7:59 pm
3D Printer(s): Longer Orange 30

Resin vat gets a filmy layer

Post by punchitindaface »

I have a Longer Orange 30 Printer. It was working fine for a few weeks. But now when I make a print the whole vat of resin gets filmy. I have all the necessary tool, equipment so the ambient light isn’t a problem.
When I checked the LCD screen I noticed some black spotting. One big one and multiple small ones.
Attachments
178355877_272991891005550_2753363736512088059_n.jpg
Lez0
Reactions:
Posts: 400
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon, Saturn 2

Re: Resin vat gets a filmy layer

Post by Lez0 »

Hi, welcome to the forum.

I'm guessing the LCD screen is completely clean. If this is so it could need replacing.
Have you had the printer long?
Do the prints come out OK?
Do you make sure the resin is well mixed before putting into the vat. You need to give it a good shake to make sure. If not the resin can settle.

Lez
Post Reply

Return to “Resin 3D Printers”