Hello
Something wrong with the file I want to print or there is a problem with the software, I don't know. I got an error code "Cannot open file to read" while trying to print this 3d model.
I've done some basic troubleshooting stuff I read on Simplify 3D forum and it didn't help. The file opens in Blender normally. What steps can I take to solve this problem?
Cannot open file to read
- Roberts_Clif
- Reactions:
- Posts: 1386
- Joined: March 25th, 2017, 8:17 am
- Location: Washington, State USA
- 3D Printer(s): Hictop 3DP11/12
Re: Cannot open file to read
Some files are saved in inches an need to be scaled X 25.4 to scale into millimeters
This model is 426.11 X 496.5 X 294.8 scaled to millimeters = 108.23 X 126.11 X 74.88mm
Print time about 18 hours
This model is 426.11 X 496.5 X 294.8 scaled to millimeters = 108.23 X 126.11 X 74.88mm
Print time about 18 hours
- GrueMaster
- Reactions:
- Posts: 522
- Joined: March 15th, 2017, 8:46 pm
- Location: Oregon
- 3D Printer(s): Hictop 3DP-17, Hictop CR-10S
Re: Cannot open file to read
I found the same issue. The original image was scaled way to big for most 3D printers (I think @LePaul has access to one that would print it).