I have an Elegoo Saturn 2 and it Rocks, now what did I do wrong?

Form 2, Form 3 , Elegoo Mars, ANYBUBIC Photon and much more....with the prices coming down, many 3D printers employing this technology are available to the masses!
Post Reply
badpig1068
Reactions:
Posts: 1
Joined: October 9th, 2022, 6:39 pm
3D Printer(s): Elegoo Saturn 2

I have an Elegoo Saturn 2 and it Rocks, now what did I do wrong?

Post by badpig1068 »

Hello boys. I just bought my first printer, an Elegoo Saturn 2. I am using Elegoo’s Standard Grey resin as I am learning how to work this machine. I have been lucky so far and stumbled into some good prints using Elegoo’s suggested settings.

Today I printed a mini of a Warhammer tank and most of the print came out very well, however on both sides of the print there was some warping. I didn’t notice the issue until after I had cleaned this print in 99% IPA. So this issue came about before I cured it.

The print is not hollow as it is not too large. In fact it’s is a little over twice the original file size.

Any thoughts on what I did wrong? Thanks ahead of time for the advice!
Attachments
44DE23AC-A9A9-4A65-B922-239935D9E9CC.jpeg
9B58FC8E-E1CE-4ADE-8728-315BA5FB3059.jpeg
48E13693-E5FA-41A9-9555-A988B6329554.jpeg
6D82BA59-815E-48C6-9A49-0014799E9B80.jpeg
User avatar
LePaul
Reactions:
Posts: 3966
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Re: I have an Elegoo Saturn 2 and it Rocks, now what did I do wrong?

Post by LePaul »

That's very interesting The YouTube Channel ModBot said he had inconsistent issues and he traced it back to bed leveling using their leveling card.
His fix was bed leveling using a standard piece of paper instead.

Post Reply

Return to “Resin 3D Printers”