What size UPS will I need.
Posted: October 15th, 2017, 8:37 am
Hi all
I am starting to do longer prints, the problem is the power supply in our house isn't good.
I have a ups on the PC's, but what size will I need for the FT-5.
The power usually goes off for 1 min sometime a little bit longer but generally no more than 5 mins..
It's frustrating getting 2 hours into a print and the power goes off.
Any advice would be welcome as electrics is not my strong point.
Thanks
I am starting to do longer prints, the problem is the power supply in our house isn't good.
I have a ups on the PC's, but what size will I need for the FT-5.
The power usually goes off for 1 min sometime a little bit longer but generally no more than 5 mins..
It's frustrating getting 2 hours into a print and the power goes off.
Any advice would be welcome as electrics is not my strong point.
Thanks